Adapter Guide - Type E
Read about each plug type
Type E Travel Adapter
This adapter is compatible with both E and F type of plugs.
Most adapters have support for two devices at the same time with One Grounded/Ungrounded (3 pin/2 pin) plug and One Ungrounded (2 pin) plug
Works in:
- Germany
- Italy
- Greece
- Netherlands
- Denmark
- Egypt
- Sweden
- Austria
- Thailand
- Turkey
- Poland
- Belgium
- Norway
- Vietnam
(see complete list of countries below)
How to identify Type E Adapter and Socket?
Type E Adapter
Type E Socket
Our Type E Adapters
- 2 USB + 1 INPUT - Type E/F
- 2 in 1 - Type E/F (3 PACK)
- 2 in 1 - Type E/F
- 2 in 1 + USB - Type E/F
- 2 USB - Type E/F
- All in One with Dual USB
- Grounded - All in One with USB (DISCONTINUED)
- LiteFuze 200W Travel Voltage Converter
- OREI 7 Pcs Worldwide Grounded Travel Adapter Plug Set
- M8 Max - 3 USB + PD USB-C
Technical specification
- The E/F electrical Shucko Adapter has two 4.8 mm round pins which are distanced 19 mm from each other.
- There is a hole instead of the third pin in the adapter for the Earthing pin of the socket to go into.
- The Type E socket has a round recess.
- The Adapter is rated at 220-240 V and 16 A.
- The E and F socket types are compatible with C and E/F travel adapters.
Guidelines for use
-
Step 1
Make sure the device you need to charge or use is switched off.
-
Step 2
Check the Voltage guide to see if yo uneed a Voltage Converter
-
Step 3
If you require a Voltage Converter, then plug your device cable or charger into the Voltage Converter first and then plug the Voltage Converter into your Type E Travel Adapter.
-
Step 4
If you aren't using a Converter, plug the device cable/charger directly into the Type E Travel Adapter.
-
Step 5
If there's a switch beside the wall socket, make sure it is in the OFF position before you plug in your device.
-
Step 6
Plug the Travel Adaper into the soecket and voila, your device will start working!.
-
Step 7
If you have a dual device adapter and want to plug in your second device, remove the adapter from the wall socket and then repeat Seps 4 to 6.